Jinglue Decotec® WB-01
Water-Based Paint for Glass (Translucent/ Transparent Colors)
Application
· Hollow Glass and Flat Glass: Cosmetic/Perfume Bottles, Wine Bottles, Vodka Bottles Coating, Glass Mosaic, etc.
Colours & Effect
All PMS Colors.
Glossy / Semi-Glossy / Matte
Advantages
· > Can be Directly spray on Cold-end Coating (Polycoat or AP-05) and achieve excellent adhesion.
> Almost Zero VOC, Eco-friendly
> Non-flammable & non-combustible, safe for transporation and storage.
> High Chemical Resistance
· > High Solids: 4H to 5H
· > High Gloss & Image Clarity
· > Abrasion Resistance
· > Excellent Adhesion
· > Ease of use
Thinning
Only requires water as thinner to be added to obtain a spray application viscosity 10 to 12 sec. IWATA #2 cup.
Hardener
AD01
Recommended Application Mixing Ratio
WB-01: AD01: Water = 100: 2: 20 to 30 (by weight)
Surface Preparation
The substrate must be clean, free from contaminants and grease.
WB-01 have excellent adhesion on cold-end treatment coating.
No need to "Burn Off" cold-end coating before spray coating.
Application Method
Method of application: conventional, HVLP and Electrostatic disc/gun spraying.
For perfect coating, Electrostatic Spraying System is recommended.
Curing Requirement
15-20 min.@ 170-180°C
Film Property
Property
|
Test
|
Result
|
Adhesion
|
1 mm cross-hatch, tape pull off
|
no removal
|
Bend
|
6 mm mandrel
|
no removal
|
Hardness
|
Pencil test
|
4H to 5H
|
100% ethanol
|
72 hours @ 20°C
|
no effect
|
3% Acetic Acid
|
72 hours @ 20°C
|
no effect
|
Heat Resistance
|
Stable to 160°C
|
no effect
|
2% caustic soda
|
72 hours @ 20°C
|
no effect
|
Solvent Resistance
|
MEK rubs
|
100
|
Pasteurization
|
30 minutes in water @ 65°C
|
no effect
|
Regulation Compliance
SGS ASTM F963-96A Standard & ROHS Standard
Asking for Sample
It is our pleasure to send you paint samples for testing.
Even if you are in the early stages of planning your project, we would love to talk. Send us an email.